Technical Data
ATX 600
Voltage
24 V / 42 V
[V]
Continuous Current
6.0 / 4.1
[A]
Speed
10 bis 300
[Rpm]
Gearbox
1:22  (1:44)
Starting Torque
36
[Nm]
ATX 400
24 V / 42 V
2.5 / 2.0
10 bis 300
1:24  (1:48)
28
ATX 800
24 V / 42 V
9.8 / 5.2
10 bis 300
1:22  (1:44)
56
ATX 200
24 V / 42 V
2.0 / 1.4
10 bis 300
1:20  (1:40)
26
Continuous Torque
1.0 / 1.0
1.3 / 1.3
4.0 / 4.0
5.5 / 5.5
[Nm]
Technical Data
KSV-K 4030-24 Series
Voltage
24 V
[V]
Continuous Current
3.0
[A]
Speed
30 bis 250
Technische Daten
KSV 5035-400 Series
Spannung
24 V / 42 V
[V]
Dauer Strom
4.0 / 2.2
[A]
Drehzahl
10 bis 300
[Rpm]
Untersetzung
1:24  (1:49)
Anlaufdrehmoment
45
[Nm]
KSV 5035-500 Series
24 V / 42 V
4.3 / 2.8
10 bis 300
1:24  (1:49)
55
KSV 5035-300 Series
24 V / 42 V
4.0 / 2.2
10 bis 300
1:24  (1:49)
45
KSV 5035-600 Series
24 V / 42 V
7.5 / 4.5
10 bis 300
1:24  (1:49)
60
Drehmoment 60%
10 / 10
4.0 / 2.0
3.5 / 3.5
3.5 / 3.5
[Nm]
Dauerdrehmoment
4.0 / 4.0
2.5 / 2.5
2.0 / 2.0
2.0 / 2.0
[Nm]
Strom 60% Einsatz
12.0 / 8.5
6.0 / 3.2
6.0 / 3.2
6.0 / 3.2
[A]
KSV 5035-200 Series
24 V / 42V
3.5 / 1.8
1.25 / 1.25
4.2 / 2.4
2.0 / 2.0
10 bis 300
1:24  (1:49)
30
[Rpm]
Gearbox
1:37.5 (1:75)
Starting Torque
14
[Nm]
KSV-K 4030-12 Series
12 V
6.0
30 bis 250
1:37.5 (1:75)
14
KSV-K 4030-42 Series
(42 V)
2.0
30 bis 250
1:37.5 (1:75)
14
Continuous Torque
1.0
1.0
1.0
[Nm]
Data
Encoder Signal
Signal
TTL 5 Volt
Pulse
2 x 60 (180° versetzt)
Max. Measurening
4 Flanken x 60 Zeitlich versetzt um 180 °
Line Drive
5 Volt
Voltage
5 Volt +/-
Technical Data
Voltage
[V]
Dauer Strom
[A]
Speed
[Rpm]
Gearbox
Starting Torque
[Nm]
KSV 4030-42 Series
42 V
3.5
10 bis 300
1:37.5  (1:75)
37
KSV 4030-24 Series
24 V
4.5
10 bis 300
1:37.5  (1:75)
37
Torque 60%ED
3.0
3.0
[Nm]
Continuous Torque
2.0
2.0
[Nm]
Current 60% ED
5.0
4.0
[A]
Technical Data
KSV 5035-400 Series
Voltage
24 V / 42 V
[V]
Continuous Current
4.0 / 2.2
[A]
Speed
10 bis 300
[Rpm]
Gearbox
1:24  (1:49)
Starting Torque
45
[Nm]
KSV 5035-500 Series
24 V / 42 V
4.3 / 2.8
10 bis 300
1:24  (1:49)
55
KSV 5035-300 Series
24 V / 42 V
4.0 / 2.2
10 bis 300
1:24  (1:49)
45
KSV 5035-600 Series
24 V / 42 V
7.5 / 4.5
10 bis 300
1:24  (1:49)
60
Torque 60%ED
10 / 10
4.0 / 4.0
3.5 / 3.5
3.5 / 3.5
[Nm]
Continuous Torque
4.0 / 4.0
2.5 / 2.5
2.0 / 2.0
2.0 / 2.0
[Nm]
Current 60% ED
12.0 / 8.5
6.0 / 3.2
6.0 / 3.2
6.0 / 3.2
[A]
KSV 5035-200 Series
24 V / 42V
3.5 / 1.8
1.25 / 1.25
4.2 / 2.4
2.0 / 2.0
10 bis 300
1:24  (1:49)
30
AdulaTech180W1
AdulaTech110W
AdulaTech70W
AdulaTech40W
The ATX DC motors (DC motors) are high-performance electric motors. The advantage of these motors is a wide range of sizes in different power categories. This will allow an improved installation in your unit. Additionally a left and right version is available. The precise aluminium casing and machining guarantee a quiet running and an equal high level of performance. All the motors have a practical attachment with which they can be fastened very stable. The built in worm gear offers a high speed reduction and high torque. The "left" models offer additionally a ball bearing version. Optional a bronze or ZnAl main gear is available and different encoders can be assembled to the motor.
ATX DC Motors with worm gearbox

ATX DC Motor Series

Adulatech_KSV_Plasic
The Econ Power continuous current Motors (DC motors) provides a good performance at low cost and compact design. The motor has an injection moulding plastic housing with three mounting legs. The stator housing however, is still made of steel. The high precision and a refined bearing design achieves perfect running characteristics. Quality brushes guarantee a long life and high power transfer.
KSV-K  DC Motors with worm gearbox Econ Power
AdulaTechKSVmidencoder1
AdulaTechKSVmaxencoder1
These electric motors are out of the KSV motor range and offer additionally an encoder (digital) or an analogue, AC or DC speed measurement system. These motors are also suitable for easier positioning tasks in automation.
KSV-E DC Motors with worm gearbox , tacho or encoder system
AdulaTechKSVmid
KSV DC Motors with worm gearbox 4030 Serie
AdulaTechKSVmax1
The KSV continuous current motors (DC Motors) are powerful, high-quality electric motors with built in worm gear. Complicated tribological research has been done and applied but also the precise manufacturing details result in a very high efficiency. This increases the output power significantly and reduces the residual heat. These continuous current motors have a practical attachment with which they can be fastened very stable. The lightweight aluminium casing is made of cast aluminium, machined. New available is a "double live" motor - these motors have special brushes which double the lifespan. Furthermore, a special motor with forced air cooling is available; these motors full fill very high demands.
KSV DC Motors with worm gearbox 5035 Serie
The development and production of our new DC motor based on our experience in motor design and gear technology. Thus our experience is the reason these motors for our customers are the first choice when it comes to technology and quality. In order to strengthen our market position even further, we have now developed a completely new modular DC motor. We intend to make the new motor more powerful than its predecessors. This motor can be used in the MIG welding machines in hospitals and nursing area for electric garage doors, farm implements and in the printing industry. Our short lead times, high flexibility and low cost production technology are the keys that will not only guarantee our customers the added value, but also an edge on the market.
 
 
Further details on request.
KSV DC Motors with worm gearbox PM 4228
AdulatechPM4228

KSV DC Motoren Series

Adulatech_Logo_2_Schnee
2015v12

Home

 

Company

 

Service

 

Products

 

Shop

 

Download

 
bkmain801
Print Page
 
Contact Us
 
Bild16
Adulatech_Logo_2

Industrial Equipment, Welding Technology and Automation

Adulatech GmbH

Data are subject to changes
© Copyright 2017, Adulatech GmbH
Bild
> Products > DC Motors with Wormgear
Deutsch